AT&T CL82415 - Edit a Directory Entry

Directory
31
Directory
Edit a directory entry
1. When a directory entry displays, press MENU/SELECT. The screen
shows EDIT NUMBER along with the phone number to be edited.
If you only want to edit the name, skip to Step 3.
2. To edit the number:
Use the dialing keys to enter digits.
Press qCID or pDIR to move the cursor to the left or right.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to add a three-second dialing
pause (a p appears).
3. Press MENU/SELECT to move on to the name. The screen shows
EDIT NAME along with the name to be edited.
4. To edit the name:
Use the dialing keys to enter characters.
Press qCID or pDIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
5. Press MENU/SELECT to save the entry.
NOTE: If the telephone number has more than 11 digits, EDIT NUMBER will
not be displayed on the screen.
•
•
•
•
•
•
•
•
•
•
•