Multiple handset use
26
Push-to-talk (PTT)
You can directly broadcast messages to the
speakerphone of any device. Press and hold
PUSH TO TALK on a handset to begin
two-way communication.
Only one device can talk at a time. To do so,
press and hold PUSH TO TALK.
You must release PUSH TO TALK, so the other person can respond.
Only one PTT session can be active at a time.
While PTT is in use between two devices, other devices cannot
use the intercom feature but can access the answering system.
NOTE: The PTT function is not available when QUIET mode is on or if you
have only one handset.
Turn PTT on or off
1. Press PUSH TO TALK when the handset is not in use. The
PUSH TO TALK menu displays.
2. Press qCID or pDIR to choose PTT On/Off, then press
MENU/SELECT.
3. Press qCID or pDIR to choose On or Off, then press
MENU/SELECT.
PTT call to a single device
1. There are a few ways to begin a PTT call to a single device.
When the handset is not in use:
If you have a two-handset system, press and hold
PUSH TO TALK.
If you have more than two handsets, press PUSH TO TALK.
Press qCID or pDIR to choose the destination handset
number and press MENU/SELECT or PUSH TO TALK.
2. Press and hold PUSH TO TALK.
3. Release PUSH TO TALK after speaking.
4. To end the PTT call, press or place the handset in
the telephone base or charger.
•
•
•
•
•
•
PTT
To Next Page
Loading...
