13
Initial basic settings
Aer you install your telephone or power returns following a power outage, the
handset will prompt you to set the date and time. To skip setting the date and time,
press on the handset.
Voice guide to set Smart call blocker and
answering system
Aer the date and time setting is done or skipped, the handset then prompts if you
want to set Smart call blocker. Press MENU/SELECT to start the Smart call blocker
setup via voice guide. To skip the setup, press .
Smart call blocker setup via voice guide
You can follow the voice guide to set up Smart call blocker.
Using the cordless handset:
f Press 1 if you want to screen calls with telephone numbers that are not saved in
your directory, allow list or star name list;
f Press 2 if you only want to screen calls that do not display a phone number; or
f Press 3 if you do not want to screen calls, and want to allow all incoming calls to
get through.
Note: You can restart the voice guide to set Smart call blocker by resetting your handset power.
Aer the Smart call blocker setting is done or skipped, the handset will then prompt
if you want to set up the answering system. Press MENU/SELECT to start the
answering system setup via voice guide. To skip the setup, press .
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
You can also restart the voice guide to set answering system using the cordless
handset:
1. MENU -> or -> Answering sys -> SELECT.
2. or -> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated numbers, as
instructed.
We recommend you program your telephone system before use. The following are
a few examples of common features to set before using the telephone. Refer to the
Handset settings and Answering system settings in the Complete user’s manual for
detailed instructions on setting all telephone features.
To Next Page
Loading...
