13
Operate
Operation Steps
Making a call
Using the cordless handset:
Press
PHONE or /SPEAKER -> Enter the telephone number.
Using the telephone base:
Press /SPEAKER -> Enter the telephone number.
On-hook dialing
(predialing)
Using the cordless handset:
Enter the telephone number -> Press
PHONE or
/SPEAKER to call.
Using the telephone base:
Enter the telephone number -> Press /SPEAKER to call.
Answering a call
Using the cordless handset:
Press
PHONE or /SPEAKER, or press any dialing keys
(0-9, TONE or #).
Using the telephone base:
Press /SPEAKER, or press any dialing keys (0-9, TONE or #).
Ringer volume
You can set the ringer volume level to one of the six levels, or turn the ringer o.
Using the cordless handset or the telephone base:
1. -> or -> Ringers -> SELECT.
2. to select Ringer volume.
3. or to choose the desire level -> SELECT.
LCD language
Using a cordless handset or the telephone base:
1. MENU -> / -> Settings -> SELECT.
2. SELECT again to select LCD language.
3. / to choose English, Français or Español -> SELECT.
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to
English without going through the French or Spanish menus.
f Press MENU on the handset or the telephone base in idle mode -> enter 364#.
Initial basic settings
To Next Page
Loading...
Need help?
General
