Getting started
15
Installation options
Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, follow the steps on this page to connect the telephone
base with a standard dual-stud telephone wall-mounting plate. You may need
a professional to install the mounting plate.
Tabletop to wall-mount installation
1. Plug the telephone line into the telephone base. If you are using a DSL
lter, plug the other end of the telephone line into the lter. Route the
telephone line cord (or DSL lter) through the wall-mount bracket hole.
2. Align the holes on the wall-mount bracket with the standard wall plate and
slide the wall-mount bracket down until it locks securely.
3. Position the telephone base, as shown below. Insert the extended tabs
(marked B) of the wall-mount bracket into the slots on the back of the
telephone base. Push the telephone base down until it is securely in place.
4. Plug the power adapter into a power outlet not controlled by a wall switch.
Plug the other end of the power adapter into the telephone base. Bundle
the telephone line cord and power adapter cord neatly with twist ties.
B
A
1
2
3
4
15
To Next Page
Loading...
