Getting started
4
Quick reference guide - telephone base
FLASH/PTT
Press to initiate a one-to-one (page
54) or one-to-group broadcast (page
55).
Press and hold to broadcast to a group of
system devices (page 55).
During a call, press to answer an
incoming call when you receive
a call waiting alert (page 43).
CANCEL
While in a menu, press to cancel an
operation, back up to the previous
menu, or exit the menu display; or
press and hold to exit to idle mode.
When the telephone base is ringing,
press to mute the ringer temporarily
(page 40).
Press and hold while the telephone
is not in use to erase the missed call
indicator.
CALL BLOCK
Press to block the incoming call when
the telephone is ringing or during the
call (page 77 and 103).
When the telephone base is not in use,
press to show the Smart call blocker
menu (page 80).
REDIAL/PAUSE
Press repeatedly to view the last 10
numbers dialed (page 41).
While entering numbers,
press and hold to insert a dialing pause.
/ANS ON/OFF
Press to turn the built-in answering
system on or o (page 107).
DIR
Press DIR to show directory entries
when the telephone is not in use (page
61).
Press to scroll up while in menus and lists.
While entering names or numbers,
press to move the cursor to the right.
CID
Press CID to show caller ID
log when the telephone is not in use
(page 71).
Press to scroll down while in menus and
lists.
While entering names or numbers,
press to move the cursor to the le.
MENU/SELECT
When the telephone is not in use, press
to show the menu.
While in the menu, press to select an
item or save an entry or setting.
To Next Page
Loading...
Need help?
General
