AT&T CL84307 User Manual

98
Smart call blocker
Screen calls without numbers
Send call to answering system
Using a cordless handset or the telephone base:
1. When the telephone starts ringing, and the screen displays
Screened call, press
or /SPEAKER to
pick up the call. If you have turned on the caller ID announce
feature, the telephone announces “You have a call from...”
and the caller’s name. Aer you picked up the call, the
telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these
options, press *”.
2. Press 4 to send the caller to the answering system.
Notes:
 To turn on or off caller ID announce, see page 22 or 33.
 When the telephone is ringing, you can press OFF/CANCEL to mute the ringer temporarily.
 The caller is sent to the answering system and can leave a message even if the answering system is off.
End call
Using a cordless handset or the telephone base:
1. When the telephone starts ringing, and the screen displays
Screened call, press
or /SPEAKER to
pick up the call. If you have turned on the caller ID feature,
the telephone announces “You have a call from...” and the
caller’s name. Aer you picked up the call, the telephone
announces “To answer the call, press 1. To send this call to the
answering system, press 4. To repeat these options, press *”.
2. If you do not want to take the call, press
on
the handset or /SPEAKER on the telephone base to end
the call.
Screened call
PRIVATE CALLER
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON
Screened call
PRIVATE CALLER
10/15
10:01
AM
HANDSET 1
1 New message
10/15
10:01
AM
ANS ON

AT&T CL84307 Specifications

General

Brand	AT&T
Model	CL84307
Category	Cordless Telephone
Language	English