12
Smart call blocker setup via voice guide
You can follow the voice guide to set up Smart call blocker.
Using a cordless handset or the telephone base:
1. MENU -> / -> Smart call blk -> SELECT.
2. / -> Voice guide -> SELECT.
3. Press 1 if you want to screen home calls with telephone numbers that are not
saved in your directory, allow list or star name list; press 2 if you only want to
screen home calls that do not display a phone number; or press 3 if you do not
want to screen calls, and want to allow all incoming calls to get through.
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated numbers, as
instructed.
Add a Bluetooth
®
cell phone/headset
Note: Your CLP99287/CLP99387/CLP99447/CLP99457/CLP99487/CLP99547/CLP99557/
CLP99587 is compatible with Bluetooth version 2.0 or above devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must rst pair and connect your Bluetooth cellular phone or headset with the
telephone base.
Bluetooth wireless technology operates within a short range (up to 30 feet). Keep
the connected device within 15 feet of the telephone base for optimal performance.
To pair and connect a cell phone using the telephone base:
1. MENU -> / -> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. SELECT to select Add cellular.
4. Disconnect the cell phone from any Bluetooth device -> Press NEXT.
5. Place the cell phone next to the telephone base. Press NEXT to turn on the
telephone base discoverable mode.
Initial basic settings
To Next Page
Loading...
Need help?
General
