AT&T DAL75111 - Bluetooth Features

20
Smart call blocker
Adding CID log
entry to block list
1. CID -> / -> SELECT to select the desired entry.
2. / -> To Block list.
3. Edit the telephone number if needed ->
SELECT
.
4. Edit the name if needed ->
SELECT
.
Adding CID log
entry to star name
list
1. CID -> / -> SELECT to select the desired entry.
2. / -> To Star name -> SELECT.
3. SELECT to conrm.
Block the caller while on a call
When you are on a home or cell call and speaking to the caller, and you do not want
to continue the call, you can end the call with block announcement and add the
number to the block list.
1. During a home or cell call, press CALL BLOCK.
2. Press SELECT to end the call.
Unblock a telephone number
If you have added a telephone number to the block list, you can unblock it.
1. MENU -> / -> Smart call blk -> SELECT.
2. / to choose Block list ->SELECT.
3. Press SELECT to choose Review -> / to browse through the block entries.
4. When the desired entry displays, press MUTE/DELETE on the handset. The
screen shows Delete entry?.
5. Press SELECT to conrm.
Notes:
f The allow list stores up to 200 entries, the block list stores up to 1,000 entries, and the star name
list stores up to 10 names.
f There are many organizations like schools, medical oces, and pharmacies that use robocalls to
communicate important information to you. Robocall uses an autodialer to deliver pre-recorded
messages. By entering the EXACT Caller ID (CID)’s name of the organizations into the star name
list, it ensures these calls will ring through when you only know the caller names but not their
numbers.