AT&T DECT EL51359 - Caller ID; About Caller ID

Handset settings
9
Telephone settings
Use the menus to change the telephone’s settings.
Menu settings
1. Press MENU/
SELECT in idle mode (when the phone is
not in use) to enter the main menu.
2. Use TCID or DIRS to scroll to the feature to be
changed. When scrolling through the menu, the top
menu item is always highlighted with a > symbol.
3. Press
MENU/SELECT to select the highlighted item.
Ringer volume
You can set the ringer volume level (1-6), or turn the
ringer off. When the ringer is off, appears on the
handset screen.
1. Press MENU/
SELECT in idle mode to enter the main
menu.
2. Use TCID or DIRS to scroll to >RINGER VOLUME,
then press
MENU/SELECT.
3. Press TCID or DIRS to sample each volume level.
4. Press
MENU/SELECT to save your preference and return
to the main menu.
NOTE: To cancel an operation, back up to the previous menu or exit the menu
display, press
OFF/CLEAR. Press and hold OFF/CLEAR to return to idle mode.
NOTES:
1. The ringer volume also determines the ringer levels of intercom calls
(pages 20-22) and the paging tone when initiating the handset locator feature
(page 19).
2. If the handset ringer volume level is set to off, that handset is silenced for all
incoming calls and paging.
?EJSFDUPSZ
DBMM!MPH
?SJOHFS!WPMVNF
SJOHFS!UPOF
SJOHFS!WPMVNF