AT&T DL72210 - Call Block Settings; Set Smart Call Blocker On;Off; Set Profile

78
Smart call blocker
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by default.
1. Press CALL BLOCK to enter the main menu when the
handset is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
handset is not in use. Press CID or DIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press MENU/SELECT again to select SCB On/Off.
3. Press CID or DIR to highlight On or Off, then
press MENU/SELECT to save the setting. You hear a
confirmation tone.
Note: If you set SCB On/O to O, all settings under Set prole (see below) will
be invalid.
Set prole
Thereareveprolesettingoptions,whichallowsyoutoquicklysetupSmart
call blocker.
1. Press CALL BLOCK to enter the main menu when the
handset is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
handset is not in use. Press CID or DIR to scroll to Smart
call blk, then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Set profile, then press
MENU/SELECT.
Smart call blk
ECO
SCB On/Off
ECO
Set profile
ECO
Screen unknown
ECO