AT&T DL72219 - Call Block Settings

78
Smart call blocker
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by default.
1. Press VOICE/CALL BLOCK on the handset when it is
not in use, and then press MENU/SELECT to select SCB
On/Off.
-OR-
Press MENU/SELECT to enter the main menu when
the handset is not in use. Press CID or DIR to scroll
to Smart call blk, then press MENU/SELECT twice.
2. Press CID or DIR to highlight On or Off, then
press MENU/SELECT to save the setting. You hear a
confirmation tone.
Note: If you set SCB On/O to O, all settings under Set prole (see below) will be
invalid.
Set prole
Thereareveprolesettingoptions,whichallowsyoutoquicklysetupSmart
call blocker.
1. Press VOICE/CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset is not in use.
Press qCID or pDIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Set profile, then press
MENU/SELECT.
3. Press qCID or pDIR to select one of the following options,
then press MENU/SELECT.
Smart call blk
ECO
SCB On/Off
ECO
Set profile
ECO