AT&T DL72319 - Temporary Tone Dialing; Chain Dialing

32
Telephone operation
Options while on calls
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call:
1. Press TONE on the handset.
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
3. Thetelephoneautomaticallyreturnstopulsedialingaeryouendthecall.
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID log or redial list while you are on a call.
Chain dialing is useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
Using a handset:
To access a number in the directory while on a call:
1. Press MENU/SELECT .
2. Press MENU/SELECT to select Directory .
3. Press CID or DIR to scroll to the desired entry or perform an alphabetical
search (page 38), then press MENU/SELECT to dial the displayed number.
To access a number in the caller ID log while on a call:
1. Press MENU/SELECT .
2. Press CID or DIR to highlight Caller ID log, then press MENU/SELECT .
3. Press CID or DIR to scroll to the desired entry, then press MENU/SELECT to
dial the displayed number.
To access the redial list while on a call:
1. Press REDIAL/PAUSE.
2. Press CID, DIR, or REDIAL/PAUSE until the desired number displays.
3. Press MENU/SELECT to dial the displayed number.