AT&T DL72319 - Page 57

51
Smart call blocker
Call block settings
5. When the screen displays Enter number, use the dialing keys to enter a
number (up to 30 digits).
 Press CID or DIRtomovethecursortotheleorright.
 Press MUTE/DELETE on the handset to erase a digit.
 Press and hold MUTE/DELETE on the handset to erase all digits.
 Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a P
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID or DIR or REDIAL/PAUSErepeatedlytondthedesirednumber.Press
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
 The screen shows Number repeated if the number is already in the block
list. You cannot save the same number twice.
7. When the screen displays Enter name, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears.Therstcharacterofeverywordiscapitalized.
 Press CID or DIRtomovethecursortotheleorright.
 Press 0 to add a space.
 Press MUTE/DELETE on the handset to erase a character.
 Press and hold MUTE/DELETE on the handset to erase all characters.
 Press TONE to change the next letter to upper or lower case.
8. Press MENU/SELECT to store your block entry.
Notes:
 Numbers saved in your directory can also be saved to the block list.
 If you save a block entry that has already been saved to the allow list, the entry in the allow list will be removed.