56
Answering System Operation
Setting answering system
Setting remote access code
A four-digit security code is required to access
your answering system from any touch tone
phone. This code is 5000 by default.
To change this code,
• Press
SELECT/MENU to enter the main menu.
• Press ^DIR twice to select the Answering Sys-
tem.
• Press SELECT/MENU to activate the Answering
System menu.
• Press ^
DIR twice to bring up the Remote Ac-
cess Code menu. Press SELECT/MENU to confirm
selection.
• Use the dial pad to enter the desired four-digit
remote code.
• Press SELECT/MENU to confirm the desired
code.
• A confirmation tone will sound and the screen
will show Choice saved.
ANSWERING SYSTEM
Remote Code
REMOTE CODE
5000
To Next Page
Loading...
