Add and register handsets
If registration fails, the system will automatically try to register
again. If registration fails aer the third try, Registration failed
appears on the handset screen. The handset shows To register
HS... and ...see manual alternately, and the telephone base returns
to idle mode. This may take up to ve minutes to occur. Please
start again from Step 1.
Notes:
f You cannot register a handset if any other system handset is in use.
f If you try to register more than five handsets to the telephone base, the telephone base shows
Registration slots are full and sounds two beeps.
Registration and deregistration
14
If it is the rst time you install your AT&T
DAL75111/DAL75121/DAL75211/DAL75221/
DAL75311/DAL75321/DAL75411/DAL75421/
GL2113-1/GL2113-2/GL2113-3/GL2113-4/
GL2113-11/GL2113-21/GL2113-31/
GL2113-41 telephone system, or power returns
following a power outage, the handset and the
telephone base will prompt you to set the date
and time when registration is successful.
Aer that, the handset will prompt if you want
to set up Smart call blocker* and the answering
system via voice guides. Press MENU/SELECT
on the handset to start. For details, see the
corresponding sections in the telephone system’s
user’s manual. To skip these settings, press
OFF/CANCEL on the handset.
* Includes licenced Qaltel
TM
technology.
Qaltel
TM
is a trademark of Truecall Group Limited.
Date: MM/DD/YY
ECO
Time: HH:MM -
-
ECO
To Next Page
Loading...
Need help?
General
