25
Getting started
Headset attachments
Over the head band
To attach the head band to the headset for wearing on the
left or right ear:
Remove any headset attachment currently connected to
the headset.
Insert the earpiece into the loop of the ear pad, as shown
in Figure 8.
Gently press the earpiece inward until it clicks into place, as
shown in Figure 9.
Adjust the head band to fit your head. Adjust and rotate the
angle of the headset until the microphone is pointing towards
your mouth, as shown in Figure 10.
1.
2.
3.
4.
NOTES:
To wear on the other ear, rotate the headset within the loop of the ear pad.
Firmly grip the padded earpiece with one hand whenever adjusting the headset
microphone up or down, as shown in Figure 10.
•
•
Figure 9
Figure 8
Figure 10
Ear pad
To Next Page
Loading...
