Display (Continued)
Display Symbol Summary
Display Symbols for Screen 1
The display symbols that apply to the first character position of
Screen 1 and their meanings are provided in the table below.
Display symbol
Meaning of the symbol
> A redirected or coverage call has been
sent to the console.
}
A call is returning to the console from
a station that is busy or does not
answer; or a call has been redirected
using Park or a data terminal feature.
&
The button has been pressed
while handling a call.
I
This is a call that was busy and is now
available (Busy-to-Idle Reminder).
Q
The call has been queued using
Callback.
F
The call has been forwarded to an
outside location.
T
The call being received is a transferred
call.
The system can signal you when a busy telephone is available by
using the Busy-to-Idle Reminder. Your display shows an “I”,
the extension number (or data terminal DDC), and name of the
now-idle person.
1354 Asay, J
When a call is queued with the Callback feature, the display is
the same as the above, but there is a “Q” in place of the “I”.
To Next Page
Loading...
