To Next PageTo Next Page
Need help?Do you have a question about the AT&T MLS-34D and is the answer not in the manual?
Shows date, time, dialed number, extension number, call duration, programming prompts.
Buttons for one-touch access to features or dialing sequences.
Buttons for primary/secondary lines or programming features.
How to use the speakerphone feature without lifting the handset.
Buttons to adjust ringer, speaker, and handset volume levels.
Indicates when someone signals via Message Light On feature.
Button to turn the microphone on or off for calls and paging.
Allows answering voice paging calls without lifting the handset.
Used to change settings or access equipment features.
Used to access Centrex conference features.
Used to access Centrex transfer features.
Used to put a call on hold for later pickup.
Used to place intercom calls to other extensions.
Stores dialing sequences or features on programmable buttons for one-touch access.
Assigns two-digit dial codes (80-99) to phone numbers for easy dialing.
Explains how to insert pauses, stops, and other special characters.
Prevents calls from ringing at your phone; intercom calls get a busy signal.
Places a call on hold so only your extension can pick it up.
Recalls dial tone to use Centrex features while on a call.
Saves the last dialed number for redialing at any time.
Redials the last number that was dialed.
Prevents other people from joining your current call.
Changes dialing for a rotary phone to touch tones for call duration.
Picks up a call ringing at any extension in the Pickup Group.
Places a ringing intercom call to all extensions in a Calling Group.
Places a voice paging intercom call to all extensions in a Calling Group.
Connects you to the optional loudspeaker paging system.
Turns on the message light on an MLS- or MLC- model phone.
Turns off the message light on an MLS- or MLC- model phone.
Forwards calls from your extension to a destination extension.
Accesses a ringing, held, or active call on a line not assigned to your phone.
Answers a call ringing at a specific extension.
Answers a call ringing at a specific extension within a Pickup Group.
Answers a call on a specific line not assigned to your phone.
Rings a specific extension by dialing its number.
Voice pages an extension through the speaker.
Joins a call on a specific line not assigned to your phone.
Defines the meaning of red, green, steady, flashing, and other light indicators.
Instructions for calling an outside number on a line assigned to your phone.
Instructions for calling an inside party (another extension).
Basic steps to answer a ringing telephone.
How to answer a call on a particular line, especially with button-down operation.
How to respond to a voice paging call when the microphone is on or off.
Steps to take to answer a new call while already engaged in another call.
How to place a call on standard hold for general pickup.
How to place a call on Exclusive Hold, accessible only by the originator.
Steps to retrieve a call that has been placed on hold.
General
