AT&T RADIANT Core - Page 2

2
Bringing the device to idle
To utilize the device as a hotspot, there is no need to login to Google.
Since these devices will be utilized as hotspots and are active, there is no need for Wi-Fi.
Default case is to accept Google Services.
Protecting the device with a password or PIN will be up to the discretion of the company.
• Assuming this functions as a Hotspot, we will skip this step.
AT&T RADIANT™ Core User Guide / April2020 / © 2020 AT&T Intellectual Property – AT&T Proprietary
Device Manual Link
Click Start
to Begin
We will not be
using Wi-Fi,
so Skip
Click
Continue
Scroll down
until you see
Accept
Select
Accept
Chose
Protection,
We chose
“Not Now”
Click Skip
Anyway
You will be
directed to
the idle screen
Press and
hold the
power button
for 3 seconds
to Power on
Some screen images may be simulated