AT&T RADIANT Core - Page 121

121
• To turn on Wi-Fi automatically, firstly you need to turn on Wi-Fi scanning.
• Wi-Fi will be turned on automatically when you are near high-quality
saved networks, such as your home network.
Open network notification
1. From the home screen, swipe up to access Apps, and tap Settings .
2. Tap Network & Internet > Wi-Fi.
3. Tap Wi-Fi preferences at the bottom of the Wi-Fi screen.
4. Slide the Open network notification switch to the On position.
• The setting is available when Wi-Fi is turned on.
• Slide the switch to the Off position to turn notifications off.
Install certificates
1. From the home screen, swipe up to access Apps, and tap Settings .
2. Tap Network & Internet > Wi-Fi.
3. Tap Wi-Fi preferences at the bottom of the Wi-Fi screen.
4. Tap Advanced > Install certificates and follow the prompts to finish the
setting.
Set network rating provider
1. From the home screen, swipe up to access Apps, and tap Settings .
2. Tap Network & Internet > Wi-Fi.
3. Tap Wi-Fi preferences at the bottom of the Wi-Fi screen.