8
Version 3.0 06/2019
User Manual—AT&T TV Device and Remote Control
C. Other Associated Hardware
1. Mounting Cables
The AT&T TV (C71KW) can be set on a tabletop or mounted
to a wall by attaching a cable tie to the recess in the bottom cover.
2. Power Supply
The AT&T TV (C71KW) uses the DIRECTV® EPS10 power supply.
3. Remote Control
The AT&T TV (C71KW) works with the RC82V Remote Control.
(The box and remote control are not compatible with any older
DIRECTV or AT&T U-verse® equipment.) Like other AT&T remote
controls, the RC82V can be programmed to operate some features
on TVs or audio/video equipment. The key features of the RC82V
Remote Control are:
FIGURE 4: AT&T TV—WALL MOUNTING
• The RC82V Remote Control works in IR, RF, and BLE (Bluetooth Low Energy) mode.
• Basic remote operations can be performed in the IR mode.
• The remote uses Bluetooth for two-way communication to the AT&T TV.
• Like RF mode, Bluetooth eliminates the need for the remote and the paired devices to be in line of
sight to each other.
• The RC82V Remote Control has a directional pad. Basic operations and functions can be made by pressing
the direction, then pressing ok.
• If the remote is not paired to an AT&T TV, the directional pad can be used for functions like Up, Down,
Le, Right, and Select.
• Once the remote is paired to an AT&T TV, the D-pad will allow you to navigate horizontally (le to right)
and vertically (up and down) in the screens.
• Once paired, Voice recognition is also available with the RC82V Remote Control so you can use voice search.
To Next Page
Loading...