15
Getting started
Mounting bracket procedure
Wall mount to desktop installation
5. Align the grooves of the bracket with the lower keeper tabs on the base. Make
sure the cords are pointing away from you as shown in Figure 13.
4. Tilt the top of the bracket towards you until it is resting on the telephone base.
3.
Position your hands as shown in Figure 12. Press your thumbs down on the
tabs that are below the bracket, holding it in place. Use your index fingers to
move the bracket towards yourself.
Lower keeper tabs
Figure 13. Bracket installation
Figure 12. Detaching the bracket from the telephone base
To Next Page
Loading...
