19
MANAGING WIRELESS & NETWORK SETTINGS
TETHERING & PORTABLE HOTSPOT
You can share your device’s mobile data connection via
USB / mobile hotspot / Bluetooth.
1. From Home screen, select Menu ( ) > Settings
( ).
2. Select Wireless & network > More > Tethering
& portable hotspot.
3. Enable USB tethering. This is enabled only when
USB is connected to the device.
4. Portable Wi-Fi hotspot: Enable Portable Wi-Fi
hotspot.
• Set up Wi-Fi hotspot: You can set up a Wi-Fi
hotspot by entering the following details:
• Network name: Enter the network name.
• Security: Select the security from the drop-down
list.
• Password: The password must have at least 8
characters.
• Maximum Connections: The maximum number
of devices which can be connected to the Wi-Fi
hotspot are ten.
• Wi-Fi Hotspot Power Mode: You can select one of
the options:
• Auto disable Mobile Hotspot after 5 minutes of
inactivity
• Auto disable Mobile Hotspot after 10 mintuets of
inactivity
• Do not disable Mobile Hotspot due to inactivity
• Connected Devices: The devices which are
connected to the Hotspot are displayed here.
5. Enable Bluetooth tethering. When you activate
Bluetooth tethering, you can share your phone’s
Internet connection with other Bluetooth paired
devices.
VPN
1. From Home screen, select Menu ( ) > Settings
( ).
2. Select Wireless & Networks > More > VPN.
3. Select Options key > Add VPN prole.
A conrmation window is displayed with the message
You need to set a lock screen PIN or password
before you can use credential storage. Select OK
to set the lock selection.
4. In Edit VPN prole screen, enter the Name, Type
(select from the drop-down list), and the server
address.
5. Enter Username and password.
6. Select Save.
NETWORK SETTINGS RESET
1. From Home screen, select Menu ( ) > Settings
( ).
2. Select Wireless & Networks > More > Network
settings reset.
3. Select RESET SETTINGS.
It reset all the network settings including Wi-Fi,
Cellular data, and Bluetooth.
To Next Page
Loading...
