AT&T Sonim XP5s - MANAGING DEVICE SETTINGS; Display Settings; Sound Profile Settings; Other Sound and Notification Settings

20
MANAGING DEVICE SETTINGS
MANAGING DEVICE SETTINGS
DISPLAY
1. From Home screen, select Menu ( ) > Settings
( ) > Device > Display ( ).
2. Set one of the following options to congure your
phone’s display:
• Brightness level: Set the brightness of the phone
display. This also optimizes the battery power
consumed.
• Wallpaper: Set the wallpaper for your home screen.
You can select from one of the following wallpaper
collections:
• Gallery: includes photos and screenshots taken
using the phone’s camera.
• Wallpapers: includes images that are pre-loaded
with the phone.
• Sleep: Set the sleep time so that the screen
brightness is turned down after specied time of
phone inactivity. This setting also optimizes the
battery power.
• Font size: Set the font size of the text displayed in
the screen.
SOUND
1. From Home screen, select Menu ( ) > Settings
( ) > Device > Sound ( ).
2. Select Prole and the following options are
displayed:
OPTION DESCRIPTION
1. Standard
Set to Standard and select
Option key > Edit.
The following options are
displayed:
Sound
• You can set Media volume,
Ring volume, Alarm
volume, Phone ringtone,
Default notication
ringtone.
• You can enable the Vibrate
when ringing.
Other Sounds
You can set Screen lock
sounds, Charging sounds, and
key press tones.
OPTION DESCRIPTION
Notication
• If Pulse LED light is
enabled, battery status
indication is not affected.
• If Flash notication alert is
enabled, when battery is
above 20% level, you can
use camera ash light for
missed events.
• If Flash call alert is enabled,
you can use Flash camera
light for incoming voice
call.
2. Outdoor
Set to Outdoor and select
Option key > Edit.
The following options are
displayed:
Sound
• You can set Media volume,
Ring volume, Alarm
volume, Phone ringtone,
Default notication
ringtone.
• You can enable the Vibrate
when ringing.
Other Sounds
You can set Screen lock
sounds, Charging sounds, and
key press tones.
Notication
• If Pulse LED light is
enabled, battery status
indication is not affected.
• If Flash notication alert is
enabled, when battery is
above 20% level, you can
use camera ash light for
missed events.
• If Flash call alert is enabled,
you can use Flash camera
light for incoming voice
call.
3. Silence
Set to Silence and select
Option key > Edit.
The following options are
displayed: