AT&T TL7600 - Switching a Call between Handset and Headset

21
Operation
Options while on calls
Switching a call between handset and headset
If you have registered the TL7600 to a
TL7610/TL7611/TL7650/TL7651 headset base
that is plugged into the telephone wall jack
(installation option 1 or 2):
To switch from the corded handset to a headset
while on a call, press ON/OFF on the headset,
then place the corded handset back into the
telephone base.
To switch from a headset to the corded handset
while on call, lift the corded handset from the
telephone base, then press ON/OFF on the
headset.
To switch from a cordless handset to a headset
while on a call, press ON/OFF on the headset,
then hang up the cordless handset.
To switch from a headset to a cordless handset
while on a call, press the button you use to
answer a call, then press ON/OFF on the
headset.
If you have registered the TL7600 to a TL7610/
TL7611/TL7650/TL7651 headset base that is
connected to a multiple line or digital businessor digital business
corded telephone (installation option 3):
To switch between a headset and the corded
handset while on a call, press ON/OFF on the
headset.
NOTE: For information about installation options 1, 2, and 3,
see the user’s manual for your headset base model TL7610/
TL7611/TL7650/TL7651. Visit
www.telephones.att.com to view or download
the user manuals.
•
•
•
•