EasyManua.ls Logo

AT&T TL7600 - Page 36

AT&T TL7600
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Maintenance and Troubleshooting
The batteries
do not hold a
charge.
Troubleshooting
Make sure that the headset battery is
installed and securely plugged into the
connector.
If the cordless headset is in the headset
base or charger and the ON/OFF light on
the headset does not come on, refer to The
ON/OFF light on the headset is off while
charging in this Troubleshooting guide.
Charge the battery in the cordless headset
for at least 6 hours. For optimum daily
performance, return the cordless headset to
the headset or charger when not in use.
You may need a new battery. Please refer to
the Battery charging section on page 4.
Your headset might be malfunctioning.
Please refer to the Limited warranty
section on page 49 for further instructions.

Related product manuals