AT&T TL7610 - Switching a Call between Handset and Headset

27
Operation
Options while on calls
Switching a call between handset and headset
When the headset base is plugged into the
telephone wall jack (installation option 1 or 2):
To switch from the corded handset to a headset
while on a call, press ON/OFF on the headset,
then place the corded handset back into the
telephone base.
To switch from a headset to the corded handset
while on call, lift the corded handset from the
telephone base, then press ON/OFF on the
headset.
To switch from a cordless handset to a headset
while on a call, press ON/OFF on the headset,
then hang up the cordless handset.
To switch from a headset to a cordless handset
while on a call, press the button you use to
answer a call, then press ON/OFF on the
headset.
When the headset base is connected to
a multiple line or digital business cordedor digital business cordedcorded
telephone (installation option 3):
To switch between a headset and the corded
handset while on a call, press ON/OFF on the
headset.
•
•
•
•