48
Maintenance and Troubleshooting
Common cure
for electronic
equipment.
If the unit does not seem to be responding
normally, try putting the cordless headset in
its base. If it does not seem to respond, do the
following (in the order listed):
• Disconnect the power to the headset base.
• Disconnect the cordless headset battery.
• Wait a few minutes.
• Connect power to the headset base.
• Re-install the battery, and place the
cordless headset into the headset base.
• Wait for the cordless headset to re-establish
its connection with the headset base. Allow
up to one minute for this to take place.
Troubleshooting
To Next Page
Loading...
