16
Headset operation
Power on/off the headset
Power on the headset before use.
To power on the headset:
Place the headset in the headset charger.
-OR-
Press and hold for two seconds.
The light flashes blue three times. You hear three beeps when
it is being powered on.
Power off the headset if it will not be used for a long time.
To power off the headset:
Press and hold for four seconds.
The light flashes red three times. You hear three beeps when it
is being powered off.
Prolonged exposure to high volume levels using the headset may damage
your hearing.
Make a call
Follow the instructions in your telephone user’s manual for
making calls.
Press on the headset at any time to join the call.
After you join the call, you can hang up the telephone and
continue the call on the headset.
Answer a call
Press on the headset.
End a call
Press on the headset or place the headset in the
headset charger.
•
•
•
1.
2.
3.
•
•
To Next Page
Loading...
