11
The SIACD USB will also work with the OSX operating system. The default audio
playback device will need to be set manually. To do this, follow the steps below;
1. Connect the partnering OSX device using a suitable USB cable. It is not
necessary to power up the SIACD.
2. Navigate to “Audio MIDI Setup”. This can be done by pressing CMD + F and
typing “midi” in the search field.
3. Select the USB Audio CODEC (0 in / 2 out) and in the settings drop down
menu select “Use this device for sound output”.
4. Audio will now play through the SIACD when the input is set to USB.
SIACD
CD Player & Integrated Amplifier
To Next Page
Loading...
Need help?
General
