1 Read instructions – all the safety and operating instructions should be read before the appliance is operated.
2 Retain these instructions – the safety and operating instructions should be retained for future reference.
3 Heed warnings – all warnings on the appliance and in the operating instructions should be adhered to.
4 Follow instructions – all operating and other instructions should be followed.
5 Water and moisture – the appliance should not be exposed to dripping or splashing and no objects such as vases, should be placed on the
appliance.
6 Ventilation – a minimum 0f 80mm is required at the rear of the appliance to ensure sufficient ventilation. The ventilation should not be impeded
by covering the appliance with items such as table-cloths, curtains etc. Further, the appliance should not be built into an installation, such as a
bookcase or cabinet, that may impede the flow or air around the appliance.
7 Heat – the appliance should be situated away from heat sources such as radiators, stoves or other appliances that produce heat.
8 Power sources – the appliance is of Class1 construction and shall be connected to a MAINS socket outlet with a protective earthing connection.
9 Power cord protection – power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit the appliance.
10 Cleaning – the appliance should be cleaned only as recommended by the manufacturer.
11 Unattended periods – the power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
12 Object entry – care should be taken so that objects do not fall into the appliance.
13 Damage requiring service – the appliance should be serviced by qualified service personnel when:
i. the power supply cord or the plug has been damaged
ii. objects have fallen or liquid has been spilled into the appliance
iii. the appliance has been exposed to rain or other serious liquid exposure
iv. the appliance does not appear to operate normally or exhibits amarked change in performance
v. the appliance has been dropped or the cabinet damaged
14 Servicing – the user should not attempt to service the appliance beyond those measures described in the operating instructions. All other
servicing should be referred to qualified service personnel.
15 Grounding or polarisation – precautions should be taken so that grounding or polarisation means for the appliance are not defeated.
16 The Mains disconnection switch is located on the rear panel. Pressing the switch downwards will turn the unit on. The unit can be turned off
by upward pressure on the switch. Please allow enough room around the unit to ensure the switch is readily operable when the unit is in use.
SECTION ONE
1.1 We l c o m e
SECTION TWO
2.1 Product Description
SECTION THREE
3.1 Room Interaction
3.2 SCM25A Pro Mk2 Monitor Placement
3.3 SCM25Ai Pro Mk2 Loudspeaker Mounting
3.4 SCM25Ai Pro Mk2 Remote Amp Installation
S E C T I O N F O U R
4.1 SCM25A Pro Mk2 Connection
4.2 SCM25A Pro Mk2 Cable Options
4.3 SCM25Ai Pro Mk2 Connection
SECTION FIVE
5.1 SCM25A Pro Mk2 Operation
SECTION SIX
6.1 R1-234 Remote Amp Operation
6.2 R2-234 Pro & R3-234 Pro Remote Amp Operation
SECTION SEVEN
7.1 Listening
SECTION EIGHT
8.1 SCM25A Pro Mk2 Acoustic Specifications
8.2 SCM25A Pro Mk2 Electronic Specification
8.3 SCM25A Pro Mk2 Physical Specifications
8.4 SCM25Ai Pro Mk2 Acoustic/Loudspeaker Specifications
8.5 SCM25Ai Pro Mk2 Physical Specifications
8.6 R1-234 Pro Remote Amp Electronic Specifications
8.7 R1-234 Pro Remote Amp Physical Specifications
8.8 R2-234 & R3-234 Pro Remote Amp Electronic Specifications
8.9 R2-234 & R3-234 Pro Remote Amp Physical Specifications
SECTION NINE
9.1 Care & Maintenance
9. 2 Wa r r a n t y
9. 3 C o n t a c t
SAFETY WARNINGS
CONTENTS
To Next Page
Loading...
Need help?
General
