ATC SCM20 - Page 2

1 Read instructions – all the safety and operating instructions should be read before the appliance is operated.
2 Retain these instructions – the safety and operating instructions should be retained for future reference.
3 Respect warnings – all warnings on the appliance and in the operating instructions should be adhered to.
4 Follow instructions – all operating and other instructions should be followed.
5 Water and moisture – the appliance should not be used near water, for example near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet
basement or near a swimming pool etc.
6 Ventilation – the appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the
appliance should not be situated on a bed, sofa, or similar surface that may block the ventilation openings. Similarly, the appliance should not
be built into an installation, such as a bookcase or cabinet, that may impede the ow of air through the ventilation openings.
7 Heat – the appliance should be situated away from heat sources such as radiators, stoves or other appliances that produce heat.
8 Power sources – the appliance should be connected to a power supply only of the type described in the operating instructions or as marked
on the appliance.
9 Power cord protection – power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit the appliance.
10 Cleaning – the appliance should be cleaned only as recommended by the manufacturer.
11 Unattended periods – the power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
12 Object and liquid entry – care should be taken so that objects and liquids do not fall into the appliance.
13 Damage requiring service – the appliance should be serviced by qualied service personnel when:
i the power supply cord or the plug has been damaged
ii objects have fallen or liquid has been spilled into the appliance
iii the appliance has been exposed to rain or other serious liquid exposure
iv the appliance does not appear to operate normally or exhibits a marked change in performance
v the appliance has been dropped or the cabinet damaged.
14 Servicing – the user should not attempt to service the appliance beyond those measures described in the operating instructions. All other
servicing should be referred to qualied service personnel. Please contact your local ATC dealer or distributor.
15 Grounding – the appliance must be grounded (connected to mains safety earth) at all times.
16 Polarisation – the polarity of the mains power connection must not be modied.
SAFETY WARNINGS
CONTENTS
SECTION ONE
1.1 Welcome
SECTION TWO
2.1 Product Description
2.2 Unpacking and Handling
2.3 Room Interaction
2.4 Listening
ACTIVE
SECTION THREE
3.1 Connection
3.2 Signal Cable Options
SECTION FOUR
Control Panel Operation
4.1 Power on/o
4.2 Mains Inlet
4.3 Fuse Holder
4.4 Input Socket
4.5 Input Sensitivity
4.6 Sensitivity Trim
4.7 Bass Shelf
4.8 Fault
PASSIVE
SECTION FIVE
5.1 Connection
5.2 Amplication
SECTION SIX
6 .1 SCM20ASL/ASLT Specications
6.2 SCM20PSL/PSLT Specications
SECTION SEVEN
7.1 Care & Maintenance
7.2 Wa rr a nt y
7.3 Contact