1 0 . C a r e a n d M a i n t e n a n c e
High technology material finishes are used in this product.The surfaces are durable
and with a little care can be kept as good as new even under conditions of heavy
use. Normally a dry duster will be all that is required to keep the finishes clean.
Heavy soiling can be cleaned using a cloth slightly moistened with a non-abrasive
household cleaner.
There are no components within the speaker that can be considered expendable,
or that would benefit from regular maintenance. There is no requirement for any
kind of routine service work and there is no schedule for preventative maintenance.
There are no user replaceable parts within the speaker and in the unfortunate event
of any malfunction, repair should be referred to either the supplying dealer or
consultant, the relevant importer, or ATC. ATC has every confidence in the quality
of each product that it manufactures.
SCM 50/100/ 15025/ 110/
8
Input Connector
Binding Posts/4mm Sockets (Tri-Wire capable)
Sensitivity @ 1 Watt/metre
85dB
Nominal Impedance
8 ohms
Recommended Power Amplifier:
100 - 1500 Watts
Passive Monitors
Drivers:
HF
MF
LF
Amplitude Linearity ±2dB
Cut-off Frequencies
(-6dB free standing)
Matched Response
Dispersion:
Horizontal
Vertical
Max Continuous SPL @ 1 metre
Crossover Frequencies
OverallWeight
Stands/Brackets
Cabinet Finishes
SCM50SL
SCM100SL
SCM150SL
234mm (9")
70Hz – 1 kHz7
38Hz & 2 kHz5
41 90.4kg ( lb)
Floor stands included with Hi-Fi products only
All products: Standard real wood veneers are available in Black Ash, Mahogany, Cherry and Natural Oak.
Other veneers and finishes can be supplied to special order.
25mm (1")
25mm (1")
25mm (1")
75mm (3")
75mm (3")
75mm (3")
314mm (12")
±0.5dB
±0.5dB
±0.5dB
60Hz - 17kHz
65Hz - 17kHz
32Hz & 25kHz
25Hz & 25kHz
±10° Coherent
±10° Coherent
±10° Coherent
±80° Coherent
±80° Coherent
±80° Coherent
112dB
115dB
117dB
380Hz and 3.5kHz, 4th order, critically damped with phase compensation
57.0kg (125.7lb)
68kg (149.9lb)
374mm (15")
9 dB1
88dB
1 1 . Wa r r a n t y a n d C o n t a c t
All ATC products are guaranteed against any defect in
materials or workmanship for a period of two years
from th date of purchase. Within this periode we will
supply replacement parts free of charge provided that
Purchasers who complete and return the
extended up to a period of six years from the
date of purchase.This guarantee does not limit
ATC can be contacted at:
Loudspeaker Technology Ltd, Gypsy Lane,Aston
Down, Stroud, Gloucestershire GL6 8HR, UK.
Telephone: 01285 760561
Fax: 01285 760683
Email: info@atc.gb.net
Website: www.atc.gb.net
the failure was not caused by misuse, accident or
negligence.
Warranty Card will have their warranty period
statutory rights.
Classic
Tower
4 kg ( . lb)5 99 2
61kg (134.5lb)
70kg (154.3lb)
Specifications comply with the following standards:Australian Standard Specification No 1127 "Sound System Loudspeakers" Part 5,
IEFE Specification Standard No 219-1975
E. & O.E. The policy of ATC is that of coninuous design and development. alterATC reserves the right to products and specifications without prior notice.
Acoustic Transducer Co. is a trading name and ATC is the registered trade mark of Loudspeaker Technology Ltd.
Loudspeaker Dimensions
(HxWxD)mm
(HxWxD)in.
Classic
Tower
71 x 3 x 46 04 25
832 x 398 x 526
884 x 498 x 592
1020 34 25x 3 x 4
1167 x 428 x 526
1139 x 528 x 592
40.2 x 13.2 x 16.7
28.2 x 12.0 x 16.7
45.9 x 16.9 x 20.7
32.8 x 15.7 x 20.7
44.8 x 20.8 x 23.3
34.8 x 19.6 x 23.3
To Next Page
Loading...
Need help?
General
