To Next PageTo Next Page
Need help?Do you have a question about the ATD AIR ATD-5850 and is the answer not in the manual?
General| Brand | ATD AIR |
|---|---|
| Model | ATD-5850 |
| Category | Rivet Tools |
| Language | English |
Users and bystanders should use safety goggles, safety glasses, dust masks, respirators, non-skid safety shoes, etc.
Keep work area clean, uncluttered, well-lit, and avoid slippery floors. Dress properly and avoid distractions.
Do not operate if tired or under the influence of alcohol, drugs, or medication. Keep bystanders out of the work area.
Air under pressure can cause severe injury. Never point an air tool at anyone or direct air at yourself or others.
Turn off air supply and drain the hose before installing, removing, or adjusting accessories or performing maintenance.
Always check for damaged, frayed, or loose hoses and fittings. Replace defective parts immediately.
Do not carry the tool by the hose. Protect the hose from sharp objects and heat.
Use air hose and couplings with a pressure rating at least 1-1/2 times the tool's maximum working pressure.
Do not depress the tool trigger/lever when connecting the air supply hose.
Do not disable the trigger. Shut off air supply and drain line when not in use or for storage.
Diagram illustrating typical air supply components: filter, regulator, oiler, hoses, and couplers.
Use clean, dry air. Drain tank daily, clean filter weekly. Lubricate air motor daily with quality air tool oil.
Add hydraulic oil when the rivet is not broken after 5 pulls. Use quality hydraulic oil like Mobil DTE 10.
Turn off air supply. Disassemble riveter head, clean inner/assembly parts with a brush, oil parts, and reassemble.
