To Next PageTo Next Page
Need help?Do you have a question about the ATD AIR ATD-5851 and is the answer not in the manual?
Use safety goggles, dust masks, safety shoes, and hearing protection as appropriate.
Keep the work area clean, uncluttered, and well-lit to prevent accidents.
Do not operate the tool if tired or under the influence of alcohol, drugs, or medication.
Wear appropriate clothing and secure long hair to avoid entanglement with moving parts.
Maintain balance, avoid reaching over running machines, and use non-skid footwear.
Air under pressure can cause severe injury; never point air tools at people.
Turn off air supply and drain pressure before maintenance or adjustments.
Always check hoses and fittings for damage; replace defective parts immediately.
Do not carry the tool by the hose and protect it from sharp objects and heat.
Use air hoses and couplings with a pressure rating 1.5 times the tool's maximum.
Do not depress the trigger/lever when connecting the air supply hose.
Never lock, tape, or disable the trigger; it must return to the 'OFF' position.
Shut off air, drain line, lubricate, and store the tool in a clean, dry location when not in use.
Add quality hydraulic oil when the rivet is not broken after 5 pulls.
Disassemble, clean inner/assembly parts of the riveter head with a brush, and reassemble.
General