Atec T3 - Quick Start: Setup and Takedown; Setup Procedure; Step 1: Place Stem; Step 2: Secure Stem

2 pages

To Previous Page

Place the Stem (F)

completely over the

Expansion Plug (I)

located on the Base (G)

Turn the T-Screw

counter-

clockwise four full rotations

to loosen stem. DO NOT

completely remove/unscrew

the T-Screw, as this is not

necessary.

Stand on the Base

and

Lift up on the Stem

separate the Stem

from

the Base

While holding the stem

over the expansion plug,

turn the T-Screw (J)

clockwise to secure stem

to base (Four clockwise

rotations).

QUICK START

. PROFESSIONAL BATTING TEE

SET UP TAKE DOWN

STEP 1:

STEP 2:

STEP 3:

STEP 4:

1 4

2 3

x4 x4

Related product manuals