Need help?Do you have a question about the ATEN VM5808H and is the answer not in the manual?
General| HDMI in | 8 |
|---|---|
| RJ-45 input ports | 1 |
| HDMI ports quantity | 16 |
| Input current | 1 A |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| AC adapter frequency | 50 / 60 Hz |
| Power consumption (max) | - W |
| Power consumption (typical) | 62 W |
| HDCP | Yes |
| Material | Metal |
| HDCP version | 1.4 |
| Product type | Scaling matrix switcher |
| Product color | Black |
| Data transfer rate | 6.75 Gbit/s |
| Maximum resolution | 1920 x 1080 pixels |
| Maximum pixel clock | 225 MHz |
| Supported video modes | 1080p |
| Cables included | AC |
| Quantity per pack | 1 pc(s) |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Master (outer) case weight | 5832 g |
| Harmonized System (HS) code | 85299097 |
Weight and Dimensions| Depth | 432.4 mm |
|---|---|
| Width | 262.3 mm |
| Height | 44 mm |
| Weight | 4160 g |
| Package depth | 515 mm |
| Package width | 338 mm |
| Package height | 155 mm |
| Package weight | 5890 g |
Details the steps for connecting all necessary cables for installation, including HDMI, IR, and Ethernet.
Explains how to configure input-to-output port connections for source display.
Details how to configure the device's IP address, subnet mask, and gateway.
Explains how to set the baud rate for the RS-232 serial port connection.
Allows configuration of EDID Mode, CEC, OSD, and Output Status features.
Manages password settings for local operation and changing passwords.
Allows configuration and saving of port connections into profiles via the GUI.
Accesses network and system configuration settings through the GUI.
Configures the VM5808H's IP settings and enables/disables Telnet.
Manages Power On Detection and configures the serial connection baud rate.
Enables users to view and select EDID modes for optimal display resolution.
Allows automatic retrieval and saving of EDID settings from a connected device.
Enables Instant Switching and scaling of video resolution for output ports.
Allows adding, deleting, and naming connection profiles for easy recall.
Enables adding, editing, or deleting user information and passwords for GUI access.
Provides the formula and examples for switching input/output ports using RS-232 commands.
To Next Page
