ATEN VS0108HA - User Manual

VS0108HA
USER MANUAL
8-Port HDMI Splitter

Summary

Overview

Features

System Requirements

Source Device Requirements

Display Device Requirements

Device Components

Front View Components

Rear View Components

Mounting Instructions

Installation Guide

EDID Management

EDID Mode Selection

Explains how to select EDID modes using the rear panel switch.

EDID Configuration via RS-232

Details using RS-232 commands for ATEN default EDID settings.

Firmware Upgrade Procedure

RS-232 Controller Integration

RS-232 Serial Interface Overview

Describes the VS0108HA's bi-directional RS-232 serial interface capabilities.

Serial Port Configuration

Specifies the recommended serial port settings for controller communication.

RS-232 Switch Port Commands

Provides commands for controlling output ports via RS-232 interface.

Baud Rate Settings via RS-232

RS-232 EDID Commands

Device Command Functions

Read Commands

Reset Commands

Command to restore the VS0108HA to its factory default settings.

Device Operation

Powering Off and Restarting

Specifications and Warranty

Technical Specifications

ATEN VS0108HA Specifications

General

Brand	ATEN
Model	VS0108HA
Category	Cables and connectors
Language	English