VT05S TPMS ACTIVATION TOOL
user guide
C6800017a User manual VT05S Page 7/11
5. OPERATING INSTRUCTIONS
5.1. TPMS TOOL OVERVIEW
Instructions
While holding the tool next to the side wall of the
tire above the sensor, press and hold the button
to trigger the sensor.
A green light will illuminate on the tool.
Continue to hold the button down until successful signal transfer to the vehicle’s ECU,
diagnostic station or until the vehicle’s horn “beeps”.
The same procedure should be followed on all wheel sensors, in a
clockwise rotation.
To Next Page
Loading...
Need help?
General
