ATEQ VT31 - Change Format Settings

VT31 TPMS TOOL user guide
User manual ATEQ VT31 Page 15/23
1.3. CHANGE FORMAT SETTINGS
SETTINGS
ZONE : AMERICA
UNITS : PSI/°F
> FORMAT : AUTO
CONTRAST: 80%
Scroll up and down to select function
or settings.
Enter settings parameter.
C
omplete listing.
>
AUTO
DECIMAL
HEXADECIMAL
Up or down to select the desired
change.
Press to confirm the change
and return to settings.
Press to return settings
without change.
AUTO : display sensor ID format in the way sensor is transmitting.
DECIMAL : force to display sensor ID in decimal (0 to 9).
HEXADECIMAL : force to display sensor ID in hexadecimal (0 to F).