3. PROGRAM SENSOR
This section is to recover a sensor ID in order to enter it in the spare blank sensor. If the
"old" sensor can be read, use the "COPY ORIGINAL SENSOR" section to recover the ID.
If it cannot be read, use the "CREATE NEW SENSOR" section to create a randomized ID.
This section details how to relearn the sensor to the ECU with the OBD-II port or to have
the part # lookup for all the sensors available for the vehicle.
Select
"PROGRAM SENSOR"
menu.
= continue
= Previous
Select car manufacturer.
Select car model.
Select year.
Note: You may have to choose a generation of sensors
Napa Echlin-92-1541-80983-12-27
81035-techsmart T46000-1-4
To Next Page
Loading...