ATEQ VT37 - Page 25

Matco Tools MT46 TPMS TOOL - User Guide
resU U-Aam563-MU manual Matco Tools MT46 Page 21/32
1.3. CHANGE FORMAT SETTINGS
Scroll up and down to
select function or settings.
= continue
= Previous
Scroll up and down to
select the format.
= continue
= Previous
AUTO: display sensor ID format in the way sensor is transmitting.
DECIMAL: force to display sensor ID in decimal (0 to 9).
HEXADECIMAL: force to display sensor ID in hexadecimal (0 to F).
1.4. C
HANGE BUZZER ON SETTINGS
When buzzer on is set to YES, a beep is triggered when the sensor ID is detected.
Scroll up and down to
select function or settings.
= continue
= Previous
The selection turns red.
Scroll up and down to
select YES or NO.
= continue
= Previous
MDMAXTPMS 80621 (12-16)
Page 28
Napa Echlin-92-1541-80983-12-27
Page 28
81035-techsmart T46000-1-4
Page 28
24