The order of the pairing process is the following: Start with the driver’s side front tire,
then the passenger’s side front tire, then the passenger’s side rear tire, and finally the
driver’s side rear tire.
The car allows for two minutes to find the first TPMS sensor and then five minutes to
find the rest of the sensors. If the procedure is not completed within five minutes, the
pairing process must be restarted.
Pairing a Tire Pressure Sensor:
1. Set the parking brake and place the car into Park (Automatic) or Neutral (Manual).
2. Turn the ignition to ON/RUN without starting the engine. You should hear a chime.
3. Press the MENU button on the Driver Information Center until the odometer blinks.
4. Continue to press the Up or Down arrow until “tire LEARN” appears on the display.
To Next Page
Loading...
