HORN
Press this switch when need be, to use the horn.
TURNING INDICATOR
Toggle this switch left/right to switch ON the indicator lights.
The indicator lights switches OFF on their own once the turn
is complete. Press in the center to cancel indicator manually.
HIGH BEAM SWITCH
This switch can be used to switch to the high beam headlight.
Avoid using this as the default mode to avoid inconvenience
to fellow riders on the road.
COMBINED BRAKING SYSTEM
The lever on the left hand side should be used to activate
the Combined Braking System i.e.: to apply brakes to both
the wheels.
As a precaution appropriate safety gear, including a helmet that
comforms to prescribed standards, eye protection gear, riding boots
and gloves should be worn while riding.
Do not consume alcohol or any kind of drugs that aect your reflexes,
before or while you are operating your electric scooter.
Do not overload the floorboard. It can handle up to 30 kgs of weight,
and it’s always better to distribute the weight on the floorboard for a
better ride handling.
If you have been riding in the rain, wait for about 15 mins before
plugging in the scooter to the Ather charger or wipe o the water on
the port using a soft dry cloth.
Never permit a guest to ride your electric scooter without proper
instructions and licences as per applicable state laws.
Any alteration or modifications to the scooter is strictly unadvisable.
This may cause unsafe scooter conditions.
Safety and Operating Tips
To Next Page
Loading...
