WWW.ATKBINDINGS.COM | PROUDLY MADE IN ITALY SINCE 2007 36
Set the ski brake in walk mode as shown at paragraph 4.1.1
Position the heel part in one of the configurations shown at “PICTURE 11”, rotating manually the heel
head and stabilizing the heel flaps into its seats.
Check that the toe part is
in the position shown at
PICTURE 12, ready to
receive the boot, free
from ice, snow or other
debris. If toe is not in the
proper position, manually
press on the front locking
lever in order to reach
the stabilized position
shown at PICTURE 12.
To Next Page
Loading...