WWW.ATKBINDINGS.COM | PROUDLY MADE IN ITALY SINCE 2007 37
Move the boot tip towards the toe part, matching the front TECH insert seats with the toe hooking pins
(PICTURE 13). From this position, vertically push on the toe part to step in. (PICTURE 14/15). Rotate a
few times the boot in order to check the proper boot-binding coupling, as shown at PICTURE 15.
Slightly pull the front locking lever towards the boot tip up to the uphill stabilized position in order to
lock the binding on the boot and allow the ascent, as shown at PICTURE 16.
To Next Page
Loading...