WWW.ATKBINDINGS.COM | PROUDLY MADE IN ITALY SINCE 2007 44
WARNING! DANGER!
The USER is fully aware that the ATK® bindings
DO NOT COMPLY WITH ANY DIN/ISO SAFETY STANDARD.
In particular, these do not comply with DIN/ISO 11088 and DIN/ISO 13992 safety standards.
By purchasing such products in a conscious and informed way as provided by this
“INSTALLATION, USE and MAINTENANCE GUIDEBOOK”, the USER expressively accepts
without any reserve all the risks arising from the characteristics of the products, relieving
ATK® by any liability regarding eventual damages caused to the user or third parties during
the use of the product itself.
Under no circumstances shall the company be liable (i) for any claim arising from an incorrect or wrong
application of the Guidebook, or (ii) for any issue or matter expressly identified as “Warning! Danger!”
within the Guidebook, or (iii) for any damage that is limited or excluded within the Guidebook.
Under no circumstances shall the company be liable any claim for special, consequential, indirect, punitive,
exemplary, or incidental damages (including lost or anticipated income, lost revenues or lost profits),
arising out of the bindings, whether such claim is based on warranty, contract, tort (including negligence
or strict liability) or otherwise.
Except as expressly set forth in this Guidebook, the company hereby disclaims any representation or
warranty, express or implied, of any kind with respect to the binding.
In case that all the warranty conditions are satisfied, the warranty case will be opened and ATK® will provide
the best support possible to have the process closed in the fastest time possible.
Based on the product state, ATK® will be free to choose the best solution in between replacing the full
product, a part of the same or just repair it.
An additional warranty period of 6 months is granted on the parts replaced by ATK® during an official service
operation, does not matter if under warranty, partial warranty or the customer charge.
In case that the warranty case requires the delivery of the product to the company, the product itself must
be returned inside the original box, complete in all its parts.
No refund can be asked to ATK® for eventual delays in the procedures under warranty conditions.
The “DEMO/TEST” bindings are intended for an unusual and particularly intensive use, which may modify
the lasting performance of the product, accelerating the wear and tear of the product itself. The warranty
period on the “DEMO/TEST” products is reduced to one (1) year after the purchasing date;
Free-of-charge or loan of use products are fully excluded by any warranty application.
For any further information and/or clarification regarding the functionality of the products and the
activation of the warranty operations, please contact ATK® at: customercare@atkbindings.com
8| LIMITATION OF LIABILITY ON THE PRODUCT
ATK RACE S.r.l. communicates that the pictures and descriptions included in this catalogue are indicative;
ATK RACE® S.r.l. has the right to modify or delete each product or process described in this guidebook.
To Previous Page
Loading...