WWW.ATKBINDINGS.COM | PROUDLY MADE IN ITALY SINCE 2007 43
The OFFICIAL ATK® REVISION PROCESS activation can be required to ATK® with the help of an ATK® DEALER
or by filling the online form that can be found at the web-page: https://www.atkbindings.com/en/technical-
support/
7| ATK WARRANTY TERMS
ATK® guarantees that the product is free from any manufacturing or material defects for a period of two
years (2) (pursuant to Italian Legislative Decree n. 24/02) starting from the date of purchase throughout
an authorized dealer of ATK® products. The effective date of the warranty must be supported by the proof
of purchase: without the original proof of purchase, the temporal effect will start from the date in which
the product left the ATK® warehouses.
The 24 months warranty (pursuant to Italian Legislative Decree n. 24/02) is applied to each product that
shows a conformity defect, if properly installed, set, adjusted and used in the respect of its destination of
use and considering the content of the whole documentation provided by the producer with the product,
including, but not limited to, the “INSTALLATION, USE AND MAINTENANCE GUIDEBOOK”, the “SEAL OF
LIABILITY” applied to the product and the “WARNING STICKER” to be applied to the ski.
This warranty, in accordance with Italian Legislative Decree n 24/02, is granted only to Privat consumers (a
person who buys goods for purposes not related to his professional activity, therefore purchases the
product without any reference to a VAT code).
Known that the ATK® bindings are NOT SAFETY CERTIFIED by any certification institute, since they DO NOT
COMPLY WITH ANY DIN/ISO SAFETY STANDARD, the warranty is not valid in case of:
- Wrong installation or installation performed by a NON “SPECIALIZED TECHNICIAN” (see chapter 3);
- Wrong use;
- Lacking of periodical maintenance as stated at chapter 9 of this GUIDEBOOK;
- Carelessness;
- Inexperienced use;
- Any modification performed on the product;
- Purchase through a non-ATK® Dealer (ATK® updated dealers list:
https://www.atkbindings.com/en/resellers/ );
- Warranty request from a NON-ORIGINAL USER (=second hand product);
- Overuse;
- Wear and tear on consumables, available as regular spare parts
ATK® does not recognize any express or implied warranties other than those specified in this chapter and
does not recognize damages raising by:
- Wrong installation, adjustment or calibration;
- Standard wear and tear, including chipping;
- Wrong set up;
- Use in combination with non-adequate gear per definition or due to wear and tear;
- Use in combination with boots not expressively designed to be used in combination with tech bindings
and/or boots that do not comply with the standard TECH system.
- Impacts or collisions with foreign bodies;
- prejudices not directly or necessarily related to the product;
- prejudices connected to the noncompliance with any DIN/ISO SAFETY standard;
- prejudices anyway avoidable with due caution required by the raw mountain environment with low
urbanization;
- prejudices increased by the damaged subject behaviour.
A warranty process activation can be required by the consumer through an ATK® DEALER or through the
ONLINE FORM that can be found at the webpage https://www.atkbindings.com/en/technical-support/.
To Next Page
Loading...