Atlanta EVA - Page 19

Atlanta Stretch S.p.A.
15
Eva Synthesi Mytho
OPT OPT
F15 Tension of film during top wrapping: selectable from 0 to 100
OPT OPT OPT
F16 Tension of film during the descent of the carriage: selectable
from 0 to 100
OPT
F17 PS (MPS2) carriage only: film extension during bottom wraps:
selectable from 120 to 400
OPT
F18 PS (MPS2) carriage only: film extension during the ascent of
the carriage: selectable from 120 to 400
OPT
F19 PS (MPS2) carriage only: film extension during top wrapping:
selectable from 120 to 400
OPT
F20 PS (MPS2) carriage only: film extension during the descent of
the carriage: selectable from 120 to 400
OPT OPT OPT
F21 Cycle with presser unit
(Opt.): enabled 1 or disabled 0
X X X X
F22 Cycle with pause: enabled 1 or disabled 0
X X X X
F23 Carriage descent position with F22 = 1
OPT OPT OPT OPT
F24 Thickness of film being used: 10 ÷ 35 microns
(Opt: for models with film consumption in metres, set the
diameter of the measurement roller from 60 ÷ 120 mm)
OPT OPT OPT
F25 End delay of the pressure descent (adjustment of pressure on
product)
OPT OPT OPT
F26 Cycle with cutting
OPT 0 = excluded, 1 included with one blade stroke, 2 included
with two blade strokes
OPT OPT OPT
F27
cutting tension)
OPT OPT OPT
F28 Film exit time after cutting: 0 ÷ 100 tenths of a second
X X X X
F29 Film extraction time with light tension at the beginning of the
cycle